Load devices from the device cache

Loading from the device cache can be helpful in cases where you need a quick report of your devices.

    1. Open the sidebar, if not already open: Extensions > Gopher for Chrome > Launch sidebar
    2. From the sidebar, be sure the Load managed devices from tab is selected.
    3. In the Load managed devices from… field, select Device Cache from the drop-down.
    4. Select query parameters using the Where and And drop-downs.
    5. If you are using Gopher Buddy and want to include that data in Gopher for Chrome, set the Include data collected...toggle to ON.
    6. Click Load to Sheet.
    7. At the prompt, click Continue.
    8. At the Finished prompt click Dismiss. Data loads to the Device Cache tab in the following sections/columns:
 

Hardware Details (required)
  Device ID
  Serial Number
Editable Device Properties
  Org Unit Path
  Annotated User
  Annotated Asset ID
  Annotated Location
  Notes

Gopher Buddy Session Data (read only)
  User
  Start
  Duration (min)
  Private IP
  Public IP
  Device OS Version
Device Details
  Recent Users
  Model
  Auto Update Expiration
  OS Version
  Status
  Last Sync
  Last Enrollment Time 
Reported Activity
  Last Sync
  Last Known IP
  Last Known WAN IP
  Last Enrollment Time
Device Telemetry (if included via setting)
  Battery Health
  Storage Used
  Total Storage (GB)
  Available Storage (GB)

loadDeviceCache1.png

Once you load devices, you can use bulk actions to make changes to the devices.

See also:

Load devices from the Admin console

Load devices from a list of Asset IDs or Serial Number

Load devices from CSV file

Articles in this section